Remedy In Case Of Faults - WAGNER AC 4500 PROFESSIONAL Translation Of The Original Operating Instructions

AC 4500
7

REMEDY IN CASE OF FAULTS

TYPE OF MALFUNCTION POSSIBLE CAUSE
Not enough material Material pressure too low
conveyed
Filter blocked
Nozzle blocked
Nozzle too small
Poor spray pattern Nozzle too large
Material pressure too low
Viscosity of coating substance too high
Atomizer air incorrectly set
Nozzle heavily worn
Air valve leaking. Seal in air valve damaged.
MEASURES FOR ELIMINATING THE MALFUNCTION
Increase material pressure
Clean or replace filter
Clean nozzle
Replace nozzle, see nozzle table
Replace nozzle, see nozzle table
Increase material pressure
Dilute according to manufacturer's instructions
Readjust atomizer air
Replace
Replace seal.
GB
7