Ce - Declaration - WAGNER AC 4500 PROFESSIONAL Translation Of The Original Operating Instructions

GB
is illegible
-
for products to which attempts at repairs have been carried
out by unauthorised persons.
-
for products with slight deviations from the target properties,
which are negligible with regard to the value and usability of
the device.
-
for products that have been partially or fully taken apart.
5. Additional regulations.
The above guarantees apply exclusively to products that have
been bought by authorised specialist shops in the EU, CIS,
Australia and are used within the reference country.
If the check shows that the case is not a guarantee case, re-
pairs are carried out at the expense of the buyer.
The above regulations manage the legal relationship to us
concludingly. Additional claims, in particular for damages and
losses of any type, which occur as a result of the product or
its use, are excluded from the product liability act except with
regard to the area of application.
Claims for liability for defects to the specialist trader remain
unaffected.
German law applies to this guarantee. The contractual lan-
guage is German. In the event that the meaning of the Ger-
man and a foreign text of this guarantee deviate from one an-
other, the meaning of the German text has priority.
J. Wagner GmbH
Division Professional Finishing
Otto Lilienthal Strasse 18
88677 Markdorf
Federal Republic of Germany
12
Subject to modifications
Declaration of conformity
Herewith we declare that the supplied version of Airless high-
pressure gun
Wagner AC 4500 Professional
complies with the following provisons applying to it:
2006/42 EG, 2014/34 EU, 2011/65 EU
Applied harmonized standards, in particular:
EN ISO 12100: 2010; EN 1953:2013; EN ISO 80079-36:2016
Marking:
II 2G X
Serial # 1500-10000
Markdorf, 26.03.2019
Hr. T. Jeltsch (Mr.)
Chief Technology Officer
Decorative Finishing
Hr. J. Ulbrich (Mr.)
Vice President Engineering
Responsible person for documents
AC 4500