Lutron Electronics Sivoia QED Wiring And Programming Manual page 37

Basic
Programming
STEP 2
Press and hold the Open (Open) and Lower buttons
simultaneously for 5 seconds to enter "Individual Level
Adjust Mode." For a keypad or CCI, the LED next to the
Close (Close) button will flash quickly, and the LED next to
the Open (Open) button will flash slowly.
Press and hold the
Open (Open) and
Lower buttons for 5
seconds
Flashing LEDs
Press and hold
the Open (Open)
and Lower but-
tons for 5 sec-
onds
Open
Press and hold
the Open (Open)
Close
and Lower but-
tons for 5 sec-
onds
IR Transmitter
Sivoia QED Quiet Electronic Drive Window System
TM
adjusting individual levels
Open
Preset
Close
LUTRON
IR Transmitter
2.25
STEP 3
Tap the Open (Open) button to select the desired EDU.
Each time the Open (Open) button is tapped the next
assigned EDU is selected. The selected EDU will begin
raising and lowering over a short distance (fast cycle).
Continue tapping the Open (Open) button until the desired
EDU is selected. Tapping the Close (Close) button selects
the previous EDU.
Press Open
(Open) to select
EDU
Press Open
(Open) to select
EDU
Open
Press Open
(Open) to
Close
select EDU
Open
Preset
Close
LUTRON
Technical Support :
+44-(0)20-7702-0657