Lutron Electronics Sivoia QED Wiring And Programming Manual page 29

Basic
Programming
STEP 4
To select an individual EDU to assign or un-assign; tap the
Open (Open) button to select the desired EDU. Each time
the Open (Open) button is tapped, the next EDU will be
selected. The selected EDU will begin raising and lowering
over a short distance (fast cycle). Continue tapping the
Open (Open) button until the desired EDU is selected.
Tapping the Close (Close) button selects the previous EDU.
Tap Open (Open)
to select EDU
Tap Open
(Open) to select
EDU
Open
Tap Open
(Open) to
Close
select EDU
Sivoia QED Quiet Electronic Drive Window System
TM
assigning EDUs to controls
Open
Preset
Close
LUTRON
2.17
Note: If desired, all EDUs can be quickly assigned or
unassigned from a keypad.
To assign all EDUs in the system to a keypad, press and
hold the Close (Close) button for 5 seconds.
To un-assign all EDUs in the system from a keypad, press
and hold the Open (Open) button for 5 seconds.
Technical Support :
+44-(0)20-7702-0657