Mounting The Burner - Riello Burners F20 Installation, Use And Maintenance Instructions

MOUNTING THE BURNER

THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL
STANDARDS.
It is necessary that the two insulating
gaskets (10, fig. 1) are placed between
the boiler door and the burner flange.
These insulating gaskets have four holes,
which, if necessary, can be modified as
shown on the drawing on the right.
Verify that the installed
burner is lightly leaned
towards the button.
(See figure 2).
The burner is designed to
allow entry of the flexible
oil-lines on either side of
the burner.
2401
D5242
Fig. 2
D5572
3
GB
BURNER FIXING AND
HINGE ASSEMBLY
S7385