Overall Dimensions; Mounting The Burner - Riello Burners 40 F20 Installation, Use And Maintenance Instructions

OVERALL DIMENSIONS

Flange
213
160
190

MOUNTING THE BURNER

It is necessary that the two insulating
gaskets (10, fig. 1) are placed between
the boiler door and the burner flange.
These insulating gaskets have four holes,
which, if necessary, can be modified as
shown on the drawing on the right.
Verify that the installed
burner is lightly leaned
towards the button.
(See figure 2).
The burner is designed to
allow entry of the flexible
oil-lines on either side of
the burner.
2360
Burner
350
= =
D5242
Fig. 2
D5572
2
GB
299
114
45
BURNER FIXING AND
HINGE ASSEMBLY
D5313
S7385