Smiths Medical Level 1 NORMOFLO H-1129 Operator's Manual page 36

10 Remove orange caps from the Gas Vent ( f ) and from the Patient
11 Attach Patient Line ( g ) to the Gas Vent ( f ) .
12 In the sterile field, use Scope Connector ( h ) to attach Patient
13 Open clamp ( c ) with Patient Line ( g ) running uphill from Gas
14 Close either clamp ( a ) or ( b ).
C–Attach Disposable Hand Piece or Specialized Irrigation
Disposables
The following procedure describes how to use the NORMOFLO
Irrigation Fluid Warming Set with disposable hand pieces or specialized
irrigation disposables that use a standard bag spike on the fluid supply
tubing.
1 Complete steps 2-8 in "B–Priming Irrigating Disposable Sets" on
2 Remove orange cap from the Gas Vent and the Spike Cap from
b
a
3 Firmly insert the Bag Spike ( a ) into the connector on the Gas
4 Complete setup and priming of the hand piece or specialized
D–Test the Audible and Visual Alarms
Test the visual and audible alarm signals by performing the following
steps.
1 Press and hold the Alarm Test button on the Fluid Warmer's
2 Release the Alarm Test button; the Over Temperature alarm
3 Clear the Over Temperature alarm condition.
®
Level 1 NORMOFLO
S E C T I O N 9
Line ( g ).
Line ( g ) to the scope.
Vent ( f ) to the scope.
page 30.
the hand piece or specialized irrigation disposable.
Vent ( b ) .
irrigation disposable as per the instructions for use.
Power and Alarm Test Panel.
• All Fluid Warmer visual alarm LEDs illuminate and the audi-
ble alarm signals beep.
continues.
• Turn the Fluid Warmer OFF and then back ON.
®
H-1129 Irrigation Fluid Warmer | Operator's Manual
• O p e r a t i n g I n s t r u c t i o n s
®
31