Out Of The Box-Assembly - Smiths Medical Level 1 NORMOFLO H-1129 Operator's Manual

S E C T I O N
SECTION 5

Out of the Box-Assembly

This device must be assembled and tested by authorized Smiths Medical
personnel, an authorized distributor of Smiths Medical, or a qualified
person authorized by the institution prior to placing the device into
service.
The following steps describe how to assemble and do preliminary setup of
®
the Level 1 NORMOFLO
Warmer).
Step 1 Verify Components of the Fluid Warmer
Step 2 Assemble Fluid Warmer to Base
Step 3 Install the Pressure Chambers
Step 4 Attach the Fluid Bag Hanger
Step 5 To Set Up the 3-Liter (3L) Pressure Accessory
Step 6 Disinfect the Recirculating Solution Reservoir
Step 7 Preparation for Use
Step 8 Perform Electrical Safety Tests
Read through the instructions completely prior to setting up the device.
Note: After unpacking the system, recycle packaging material according to
hospital policy for recyclable materials.
® ®
Level 1 NORMOFLO H-1129 Irrigation Fluid Warmer | Operator's Manual
5 • O u t o f t h e
®
H-1129 Irrigation Fluid Warmer (Fluid
B o x - A s s e m b l y
7