Lightolier Calculite HID Adjustable Accent C4MRA Specification Sheet

Page 1 of 2
6" min.*
6 1/2" max.
5 1/4"
Ceiling Cutout: 5 1/16" (129 mm) Dia.
Reflector Trim
C4MRA CLW
Specular Clear, White Flange
C4MRA CLP Specular Clear, Polished Flange C4LVMU
C4MRA
Add suffix. See options for
other finishes.
Note: Magnetic transformers may produce audible sound when used with
dimmers, which may be objectionable in acoustically critical areas.
Features
1. Aperture Cone: 16 ga. aluminum. Slot cut cone opening minimizes view
into fixture. Keyed to lampholder assembly for true aiming of lamp through
aperture center and to prevent incorrect installation of cone. Hinged, snaps
onto adjustable lampholder for easy tool-less installation. Interchangeable
with other Evolution 4 1/2" low voltage trims.
2. Adjustable Lampholder: Die-cast aluminum. Built-in aperture shield
blocks view into fixture. 45° vertical tilt (35° max. with remodel frame-in
kit), 358° horizontal rotation; lockable. Hot aiming is possible using a phillips
screwdriver. Matte black finish. Lamp shield keeps interior of fixture dark.
3. Lamp Support: Die-formed aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 2" dia.
accessories.
4. Cover Glass: High temperature, tempered soft focus lens.
5. Vertical /Horizontal Locking: Single screw adjustment; independent
locking system.
6. Socket Harness: Porcelain bi-pin socket. Pre-wired with No. 18 Teflon
leads.
7. Power Harness: Provides power to transformers.
8. Frame-In Kit: Compatible frame-in kits are listed above. See separate
frame-in kit specification sheets for details.
Non-IC and Non-IC AirSeal
sides and wiring compartments and must not be placed above fixture in a
manner which will entrap heat.
IC-AirSeal - Fixture may be in direct contact with insulation.
®
9. Maximum Ceiling Thickness: .875", 1.75" with C4TCA2 accessory
(see C4TCA2 specification sheet for details.)
Lightolier is a Philips group brand
C4ALV
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
7 5 2 1
3/4"
* 6" min. is for up to
4 1/8" Dia.
3/4" thick ceiling.
5 1/2" Dia.
Frame-In Kit
Non-IC 120V/277V
C4LVE1
C4LVE2
42-75W
MR16(12V)
- Insulation must be kept 3" away from fixture
®
Calculite Evolution Adjustable Accent
®
C4LV
12 5/8"
(321mm)
11 3/16"
5" (127mm)
(284mm)
14 3/8"
(365mm)
3 4 6 5 8
.875" Max. Ceiling Thk.
C4MRACLW/C4LV or
C4MRACLW/C4ALV
Non-IC AirSeal
Magnetic 120/277V C4ALVMU Magnetic 120/277V
Electronic 120V C4ALVE1
Electronic 277V 42-75W
MR16(12V)
Remodel Frame-In Kit
Non-IC 120V
C4LVE1RM 50W Max.
MR16 (12V)
Options & Accessories
Clear: CL Gold: GD
Black: BK Comfort Clear Diffuse: CCD
Specify desired flange: W White; P Polished
Evolution 4" Trims with Non-IC Frames
C4MRA 1 Secondary Color Lens or 1 Mixing Color Lens and 1 Specialty Filter
Evolution 4" Trims with AIC Frames
C4MRA 1 Secondary Color Lens or 1 Mixing Color Lens or 1 Specialty Filter
Labels
UL Listed (Suitable for damp locations), I.B.E.W
Teflon is a registered trademark of E.I. DuPont.
®
US Patent No. 5,957,573. Other US and Foreign Patents Pending.
Job Information
Job Name:
®
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • F0708
4 1/2" Aperture MR16 Reflector Trim
C4AICLV
10 1/8"
14 5/8"
(257mm)
(372mm)
9" (229mm)
22 3/8"
(568mm)
9 1/4"
C4MRACLW / C4AICLV
120V/277V IC AirSeal 120V
® ®
C4AICLVM1
Electronic 120V C4AICLVE1
Lensed, Horizontal 20-50W
Lamping MR16(12V)
See separate specification sheet
for more information
White: WH
Champagne Bronze: CCZ
Type:
C4MRA
Magnetic 120V
Electronic 120V