Table of Contents
Advertisement
3. SAFETY
3.1
PRECAUTIONS
The onboard LiFePO4 battery requires safe handling during operation, storage, and delivery.
1.
Recharge only with the charger provided by Go Power!. A charger that is suitable for one type of battery pack may cause a risk
2.
of fire when used with another charger.
Charge the product in a well-ventilated location. Do not put this product in water, or use unnecessary force when operating.
3.
Keep this product and related accessories in a safe place, not accessible by children.
4.
Do not expose it to sources of heat or ignition to avoid a potential fire and/or explosion.
5.
Avoid inserting foreign objects into the charging/discharging sockets or ventilation holes, as this could cause a short circuit and/
6.
or personal injury.
Do not disturb the fan while it is in operation. Inadequate ventilation may cause damage to the unit.
7.
Do not stack anything on top of the unit while in storage or in use.
8.
Do not disassemble, crush, heat the unit above 40°C, or incinerate. Doing so risks fire, explosion and/or personal injury.
9.
Inspect the product for dirt, dust, and moisture regularly.
10.
This power station generates the same potentially fatal AC power as a wall outlet at home. Please use it carefully.
11.
Any repair must be carried out by the manufacturer or an authourized repair agent in order to avoid any danger.
12.
Do not attempt to replace the internal battery.
13.
The unit should not be kept at 0% capacity for extended periods or it will enter lockout mode and will become unusable.
14.
ANY MANIPULATION OR MISUSE OF THIS UNIT OR ITS COMPONENTS WILL VOID ALL WARRANTIES.
3.2
WARNINGS
�
�
&
�
�
�
Never leave this product unattended, or
This unit IS NOT
subject to inclement weather.
weatherproof
Observe caution
Electricity can be very dangerous. Take
while connecting
appro-priate caution when making connections.
Observe appropriate safety precautions when
Battery and
wiring safety
handling or working around batteries.
Ensure all connections are tight and secure.
Wiring
Loose connections may generate sparks and
connections
heat. Be sure to check all connections regular l y .
Reversing polarity of the any plugs will cause
the unit to give a warning tone. The unit will
Observe
not function unless connections are made with
correct polarity
proper polarity. Failure to correct polarity could
damage the internal components.
Do not exceed the
Charge Controller
current and
voltage ratings
Refer to charging section for more details.
gpelectric.com | [page 5]
Advertisement
Table of Contents
