BOSS ILLUMINATION PARK II Product Manual

PARK II
STREET LIGHT

PRODUCT SPECIFICATIONS

Input Voltage : 100-277 VAC
Ambient Temperature : -10 to 45°C
Dimming : No
Weight : 4.8 – 10.5kg
60mm 66
IP

PARTS INCLUDED

LED 10m Cable
Luminaire
OPTIONAL COMPATIBLE PARTS sold separately
Photocell
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
10
IK
04.20
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.

PRODUCT VARIANTS

Power : Photocell :
S
75W
115W
145W CCT :
M
180W
200W
230W Colour :
L 300W
420W

ADDITIONAL INFORMATION

1. This luminaire is not dimmable.
2. Luminaire installation angle is adjustable. Refer instructions
overleaf.
3. Installation must be carried out with care to ensure the surface of
the luminaire is not scratched or damaged. Damaged surfaces will
result in material corrosion when exposed under harsh weather
conditions.
4. Please ensure luminaire cover is sealed.
5. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
page 1 / 3
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
Beam Angle : Type III
Yes
No
3000K
4000K
5000K
Black
Silver
www.bia.lighting | sales@bia.lighting
Type IV
Type V