Ramsey Electronics WILDCAT 80,000 LB Series Operating, Service And Maintenance Manual page 12

19. Remove the clutch cylinder #1 by removing the (2) cotter keys #204 and (2) pins #206 from
either end of the air cylinder #207.
20. The clutch cylinder support angle #8 can be removed by removing the four bolts #66 and nuts
#65 attaching it to the mounting angles.
21. Remove the clutch yoke #29 by removing center pivot bolt #21 and nut #65.
NOTE:
VIEW SHOWN LESS DRUM AND ANGLE CUT AWAY FOR CLARITY
65
66
29*
1
206
* CLUTCH YOKE #29 SHOWN REMOVED
AND PARTIALLY INSTALLED
FOR CLARITY
10
21
29*
204
202
206
207
8
209
204
65
66
OM-914207-0211-D