SAFETY WARNING 1. This bed is designed for use only mattress (es) meeting the following specifications on the upper bunk, and lower bunk: Down bed Bed type Length With Thickness 74"-75" 8" max Twin Standard 38 1/2" Up bed (Bunk bed and tribed included) Bed type Length With...
Part List Hardware List WF287132 Lower leg Left Front / Right Back-2pcs Lower leg Left Back / Right Front-2pcs Upper leg Left Front / Right Back-2pcs Slats - 28pcs Upper leg Left Back / Right Front-2pcs Horizontal bar - 6pcs...
Hardware List Wood dowel (8pcs) Hex-Head bolts (16pcs) Hex-Head bolts (19pcs) 1/4"*15 (9.5mm) Hex-Head bolts (5pcs) Horizontal-Hole bolts(35pcs) Connecting bar (4pcs) 100*20*63 mm Hex-Head bolts (8pcs) Wheels (4pcs) Wood screws (78pcs) 75*20*2mm Metal bracket (2pcs) Wood screws (16pcs) Metal plate (4pcs) (1/4")4.5*58mm Wood screws (16pcs) Allen key (1pc)
Page 6
STEP 1: 8PCS 8PCS Note:Part 5 will face up with the "x" mark on it, otherwise it cannot be tightened STEP 2: 4PCS 8PCS 8PCS...
Page 7
STEP 3: 8PCS 8PCS Note:Part 5 will face up with the "x" mark on it, otherwise it cannot be tightened STEP 4: 4PCS 11PCS 11PCS...
Page 8
STEP 5: 4PCS 4PCS 16PCS Connect Upper bunk to Bottom bunk by using connecting bar (6). Attached Metal plates (12) into pre-drill holes at intersect Leg (B) with Leg (F), Leg (D) with Leg (H), Leg (C) with Leg (G) and Leg (A) with Leg (E) by using screw (13).
Page 9
STEP 7: 5PCS STEP 8: 56PCS 79mm 79mm 42,5mm Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing ,...
Page 10
STEP 9: 4PCS 8PCS STEP 10: 14PCS 234mm Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing , hold it in...