Table of Contents
Advertisement
Service Manual
Tap "Name" to customize the preset name.
Preset device can't be selected and it will default to "babyroom". Select "On" for the timer type. Select repeating days to complete the
preset.
Multi-device preset: This can preset multiple devices to execute a command at a specific time.
Please refer to the instructions as how to set preset time, name, timer type and repeating days for a single device.
Tap "Preset device" to select one or more devices. Then return to the page "Device".
(4) Link(only for the mode with this function)
Select a master device. When the environment has satisfied the parameters as set in the master device, slave devices will execute
commands to realize devices linkage.
Step 1: Set the parameters of master device (Select master device, select environment parameters, select master device status).
Tap
at the top right corner of the homepage "Device". Select "Link" and enter the page "Add linkage". Tap "Device parameter" to
enter the page "Select device". Take "baby room" as an example. Tap "babyroom".
Enter the page "Select environment parameters".
Technical Information
36
Advertisement
Table of Contents
