Table of Contents
Advertisement
Service Manual
Multi-device preset: This can preset multiple devices to execute at a specified time Please refer to the instructions as how to set preset
time, name, timer type and repeat days of a single device.
On the page "Select device", select one or more devices to preset multiple devices.Then return to the page "Home control".
(4) Link(This function is applicable to partial of models)
set in the master device, slave devices will execute commands to realize devices Select a master device. When the environment has
satisfied the parameters as linkage.
Step 1: Set the parameters of master device (Select master device, select environment parameters, select master device status).
Click
at the top right corner of the homepage "Home control". Select "Link" and enter the page "Add linkage". Select "Device
parameter" to enter the page "Select device". Take "baby home" as an example. Select "baby home".
Enter the page "Select environment parameter".
Select "Temperature" to enter the page "Select temp parameter". Slide up and down to adjust temperature. Then select "upper limit" or
"lower limit".Click "Mode" and "On-Off" to select the status of master device. Then save the data.
Technical Information
25
Advertisement
Table of Contents
