How to Use
continued
Shaving the beard
■ Using the trimmer
The trimmer
stands upright
■ Switching the foil frame movement
●
To apply the shaver closely to the skin
(It prevents leaving beard unshaved)
Set to FREE
FREE
LOCK
Tips for better usage
Gently apply the cutting edge at a right angle and move it from
top to bottom slowly
Trimming sideburns
EN13
continued
Slide the trimmer
1
handle up to the top
position.
2
Press
and use.
●
To return the trimmer to its
original position
Slide the trimmer handle down
while pressing the top knob.
FREE
LOCK
Top knob
●
To fix the foil frame
FREE
LOCK
Moves
Pre-shave of long
beards
Cleaning the Shaver
We recommend cleaning the shaver after each use.
Cleaning the shaver with water
●
Turn the shaver off and disconnect the AC adaptor.
FREE
LOCK
Set to LOCK
Fixed
1
Rinse the system
outer foil with water,
and apply hand soap
or cleaning solution
(sold separately).
[P. EN20]
2
Make foaming in
sonic vibration
cleaning mode.
(To suppress the spatter of bubbles)
① Press
2 seconds.
( The sonic vibration cleaning
mode is activated.)
Blink outward from
the center
▼
After about 20 seconds, sonic
vibration cleaning mode stops
automatically.
●
To stop in the middle of
operation,
press
Continued to the next page
for more than
.
EN14