Preparing The Shaver For First-Time Use - Panasonic LAMDASH ES-TLVFE Operating Instructions Manual

Preparing the Shaver for First-time Use

Charging the shaver
●
Set the power switch to off beforehand.
●
Wipe off any water droplets on the appliance socket.
EN9
1
Insert the appliance plug into the shaver.
2
Plug in the adaptor into a household outlet.
(The charge status lamp glows)
Charging is completed after approx. 1 hour.
▼
3
When the charge status lamp turns off
Disconnect the adaptor.
Notes
●
When charging the shaver for the first time or when it has not been in use for more
than 6 months, the charging time may change or the charge status lamp may not
glow for a few minutes. (It will eventually glow if kept connected.)
●
If the temperature is outside the recommended charging temperature range (10 °C –
35 °C), the charging time may be longer, or
fail.
●
The shaver can be used for approximately 2 weeks with a full charge. (Based on one
3-minute dry-shave usages per day in an ambient temperature range of 20 °C – 30 °C.)
• Depends on beard thickness, force applied to the skin, and frequency of use of
sonic vibration cleaning mode.
●
If the shaver causes noise on radios, etc. during charging/use, change the location.
may blink rapidly and charging may
EN10