Carson SA-450-80 PG Installation And Operating Manual

Carson amplifier installation & operating manual

Advertisement

Quick Links

SA-450-80 WITH PA VOLUME ON FACE
SA-450-80 PG (Positive GND)
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
TB0329B
CARSON MANUFACTURING CO., INC.
5451 NORTH RURAL STREET
INDIANAPOLIS, IN 46220
(888) 577 6877
TECHNICAL BULLETIN
RADIO
RADIO
HORN
PHASER
PHASER
INSTALLATION AND
OPERATING MANUAL
SA-450-80 14V
Carson
MANUFACTURING COMPANY, INC.
www.carsonsirens.com
HORN
SIREN
SIREN
MAN
MAN
WAIL
WAIL
YELP
YELP
ON
ON
Page 1 of 7
PA PA
VOL
VOL
SA450
SA450
OFF
OFF
10/18/03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SA-450-80 PG and is the answer not in the manual?

Questions and answers

Summary of Contents for Carson SA-450-80 PG

  • Page 1 OPERATING MANUAL SA-450-80 WITH PA VOLUME ON FACE SA-450-80 PG (Positive GND) Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
  • Page 2 Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
  • Page 3 Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY PRECAUTIONS For the safety of the installer, vehicle operator, passengers and the community please observe the following safety precautions.
  • Page 4 ELECTRICAL CONNECTIONS Disconnect vehicle battery before making any electrical connections. Electrical connections to the amplifier are made using the wiring harness supplied. If the amplifier needs service the connector can be easily removed without unwiring the harness. The power supply for the amplifier must be capable of delivering peak currents up to 50 amps for adequate short circuit protection and reliable operation.
  • Page 5 Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines) The OFF/ON Toggle Power Switch controls the siren power. The siren may be left on any time the vehicle is in operation.
  • Page 6 Radio volume too low If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e-mail at service@carsonsirens.com...
  • Page 7 Item Part # Description CP3966 Bolt, mounting, 1/4-20 X 3/8 (2 required) CP3676 Bracket, mounting #8941 Button, red (C&K #894103000) (for pushbutton switch) CP3886 Cable, wiring harness 640584-1 Connector, power (AMP #640584-1) CP3547 Control, PA volume (350 ohm) CP3675-1 Cover CP4852 Knob, rotary function switch CP4853...

This manual is also suitable for:

Sa-450-80Sa-450-80 14v

Table of Contents