Table of Contents
Advertisement
4. System Management
4.1. Preview Setting
For the model that supports preview, use can live preview input source content and video wall
display.
Default IP of preview card is 192.168.1.201. Follow below steps to revise IP address.
1.
Navigate to Setting, and click Preview to enter into setting page.
Enter desired IP address, subnet mask and gateway. Trigger "Display preview image
on video wall", you can preview input source and video wall display at software.
Preview card IP and controller IP should within same LAN network.
4.2. EDID Management
Navigate to Setting and click EDID to enter into setting page.
27
System Management
Advertisement
Table of Contents
Need help?
Do you have a question about the VWC2-ROC and is the answer not in the manual?
Questions and answers