Switching Signal - DigiBird VWC2-ROC User Manual

3. Precisely Creating. Select target input, Click New, and complete required information.
Window parameters are descried in below table.
No. Parameter
1 Name
2 Coordinates To locate window position by pixel. Take left top corner as valid.
3 Size

3.3.2. Switching Signal

There are 2x methods to switch signal
1. Select one window at virtual video wall, double click target signal from inputs list to
switch.
2. Drag one input source and drop to a window to switch.
Description
Display input source name
et window height and width
14
Operation