Table of Contents
Advertisement
Besides of input IP manually, you can also search controller IP address.
1.
Enable Network Setting
2.
Click Find IP to find all controllers within network.
3.
Select target controller
4.
Confirm to complete setting.
If no controller has been detected, please ensure whether PC IP and controller IP within
same network.
3.1.1.2.
Serial Port Communication
Connect controller to control PC via serial cable.
Follow below steps to configure:
1.
Enable COM Setting.
2.
Select corresponding COM port from drop down list.
3.
Confirm to complete setting.
6
Operation
Advertisement
Table of Contents
Need help?
Do you have a question about the VWC2-ROC and is the answer not in the manual?
Questions and answers