Maintenance; Cleaning The Ptp - PerkinElmer PTP-1 User Manual

Configuration and Maintenance . 51

Maintenance

Cleaning the PTP

Switch off the mains voltage and remove the mains cord before cleaning.
WARNING
You can clean the outside of the unit using a damp cloth. Mild detergent may be used, if
necessary. Always perform a patch test on an inconspicuous area before you clean the entire
accessory.
Avoid spilling liquid into the accessory. Clean all external spills immediately. If anything that
is spilled enters the main body of the unit, make the PTP inoperative and then contact a
PerkinElmer Service Engineer.