Location And Ventilation - PerkinElmer PTP-1 User Manual

16 . Peltier Temperature Programmer User's Guide

Location and Ventilation

To allow for adequate cooling the system should not be sited near to room heating
equipment, for example, central heating radiators.
Do not obstruct the cooling vents on the top panel of the PTP.
CAUTION
To prevent accidental spillages and damage to the PTP, do not stand cups of
liquid on top of the instrument.
WARNING If any liquid does enter the main body of the PTP, switch off the accessory
immediately and make it inoperative. Contact your local PerkinElmer Service
Engineer.
Make sure that the electricity supply inlets on the instrument are not
obstructed i.e. leave a gap to allow easy disconnection from the electricity
supply.
WARNING