Specification - PerkinElmer PTP-1 User Manual

Specification

Temperature Range
Temperature Readout Resolution
Temperature Readout Stability
Alarms (Cell holder)
Alarms (Whole system)
Accuracy of the set temperature
Difference between set and actual
temperature in the cell
Achievable temperature programming
rate (heating and cooling)
Memory for patterns (non volatile)
Stirring Speed
Maximum temperature difference from
cell to cell (PTP-6 and PTP-6+6)
Maximum RMS current input
o
0 – 100 C
o
0.1 C
o
+ 0.1 C
Alarms to be set for high and low
temperature limits through keyboard.
Configuration parameters P-01 and
P-02 (see page 47).
If the temperature of the heat sink on
the cell holder reaches 70
system is automatically switched off
o
Better than +0.7 C at 0
o
Better than + 0.3 C at 30
o
Better than -1.5 C at 100
o
Better than +1.2 C at 0
o
Better than + 0.5 C at 30
o
Better than -3 C at 100
-1
Better than 10 °Cmin
2 methods (8 steps)
Up to approximately 1800 rpm
o
Better than 0.8 C at 5
o
Better than 0.4 C at 30
o
Better than 0.8 C at 70
550 mA
Description . 35
o
C the
o
C
o
C
o
C
o
C
o
C
o
C
o
C
o
C
o
C