Oster XPERT Series Instructions Manual page 17

Before you use product for first time, separate jar, jar lid, filler cap, black sealing ring, blade and
black threaded jar bottom. Wash in warm, soapy water, or top rack in the dishwasher. Rinse and
dry well.
HOW TO ASSEMBLE 2 L JAR (& 1.5 L JAR
ACCESSORY - INCLUDED IN SELECT MODELS)
(FOR MODELS WITH BLEND-N-GO CUP ONLY)
Black
correct
WARNING: Blade is sharp. Handle with care.
1. Install the sealing ring over the blade (Fig. 14).
2. Preparing the jar:
a. For models with Boroclass
bottom opening of the jar ensuring the notches in the collar fit into the four tabs on the jar (Fig. 15).
b. For models with Tritan™ jar, turn the jar upside down so the small opening is at the top.
3. Turn the blade with sealing ring upside down and place into the bottom of the jar (Fig. 16).
4. Turn the black threaded jar bottom down and place it over the small opening of the jar and the
bottom of the blade. Turn clockwise to tighten (Fig. 17). Be sure the black threaded jar bottom is
locked securely to the jar before use.
5. Turn the jar up and place it onto the motor base (Fig. 18).
6. Put the ingredients into the jar.
7. Place the lid and filler cap on the jar.
8. Plug the power cord into a standard household outlet of the same voltage as the one indicated in the
rating plate of your blender. You are now ready to start.
Fig. 14
Locking
Lever
glass jar only, turn jar upside down and place the collar on the small/
®
Fig. 15 Fig. 16
E n g l is h -5
Gray
incorrect
Fig. 17
Black
correct
Gray
incorrect
1250
1L
1000
750
500
Fig. 18