Oster XPERT Series Instructions Manual page 18

With texture control
Hide thumbs Also See for XPERT Series:
Table of Contents

Advertisement

Available languages

Available languages

FOR BRAZIL MODELS ONLY:
NOTE: Your blender has an interlock system on the motor unit. This will prevent the motor from
starting if the blender jar is not properly placed on the motor unit. If the jar is removed from the
motor unit during operation the blender will stop, and the lights will flash continuously. If the lights
are blinking, the jar should be removed and placed onto the motor base once again. When the jar is
correctly in place, the lights will stop blinking and the blender will be ready for use.
USING THE AUTOMATIC PROGRAMS WITH
TEXTURE CONTROL
Fig. 19
Fig. 20
Fig. 21
Fig. 22
1. Press the power button
will blink, meaning the blender is active and ready to use.
2. Turn the dial to select the appropriate automatic program for your recipe
(Fig. 20).
• Juice/smoothie program
• Milkshake program
• Food processor program
Note: Automatic programs work in conjunction with the texture control. Once
an automatic program is chosen, the default texture selection will be 'media'
(medium).
3. To change the texture selection, press one of the three texture selection
buttons appropriate for your recipe (Fig. 21).
• Líquida (Thin)
• Media (Medium)
• Espesa (Thick)
4. Once you have chosen the automatic program and the desired texture
selection, press start/stop button
5. To change your selection, press start/stop button
program (Fig. 22). Choose the desired automatic program and texture
selection. Press start/stop button
6. Once the program is finished, the blender automatically stops.
PLEASE NOTE: You may press the start/stop button
program at any time. The blinking blue light indicates that the blender is
ready.
7. Press the power button
Note: This blender is pre-programmed to turn off automatically if not
used for a period of several minutes. All lights will turn off when the unit
automatically powers down.
E n g l is h -6
to turn the blender on (Fig. 19). The power light
(Fig. 22).
to start the program (Fig. 22).
to turn the blender off (Fig. 19).
to cancel the
to cancel the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents