Keeping The Manual - OMAC B Series Operation And Maintenance Manual

Rev.4 del 01/2011 O.M.A.C. s.r.l.
The technical manuals relating to the LDPU is part of the same unit; therefore all the above mentioned technical documentation must accompany this
machine even if it is sold.
WARNING
For the proper management of safety during use and maintenance of the LDPU, all the technical documentation must accompany it even if it is sold.
DANGER
The technical manuals contain the information / procedures concerning the use and management of safe maintenance of the LDPU, it must be kept in
the vicinity of the place in which the machine operates, to which this documentation refers, in a place easily accessible by the operator responsible for its
operation. The operator responsible for its operation and the maintenance engineer must be able to fi nd and consult this documentation at all times.
DANGER
All the technical documentation that refers to the LDPU must be kept in an easily accessible place so that it can be consulted quickly. In addition, the
personnel responsible for its use and maintenance must be informed where this documentation is kept.
Throughout the LDPU there are nameplates of the various components of the same unit.
The nameplate applied on the left side of the "B Series lobe displacement pump unit" (left side of the pump looking at the rotors) carries the
LDPU serial number (the serial number starts with the letter "L" and is followed by six numbers), to which the item code of the LDPU is uniquely associated
to. The coding rule of the LDPU item code is explained in section 1.2.2.
On the surfaces of the various components of the LDPU, there are plates with the prohibition to operate the LDPU dry (plate A), placed on the bearings
box of the "B Series lobe displacement pump unit", and the plate warns the operator of the presence of mobile parts under the butt strap (plate B). In the
event of LDPUs predisposed for pumping fl uids at temperatures above 50°C, there is a signal placed on the same pump that warns the operators of the
presence of high temperature surfaces, as shown in fi gure C:
A
NOTE
Please note that the markings / labels present along the LDPU cannot be removed or altered for any reason.
WARNING
It is forbidden to use any O.M.A.C. item when it is without the nameplate. Should the item be without its nameplate
it is compulsory for the customer to contact the O.M.A.C. Technical Offi ce that will see to identify the item and re-issue the nameplate.
A
B
B
Via Giovanni Falcone, 8 42048 Rubiera (RE) - Italy
E-mail:info@omacpompe.com SitoWeb:www.omacpompe.com
C
O.M.A.C. s.r.l.
Tel.0522/629371 - 629923 Fax 0522/628980

KEEPING THE MANUAL

LABELS APPLIED
XI