How To Consult And Keep This Documentation; Symbols Used - OMAC B Series Operation And Maintenance Manual

HOW TO CONSULT AND KEEP THIS DOCUMENTATION

This OMM is a document written by O.M.A.C. s.r.l. and is relative to the installation, safe use and maintenance of the LDPU, in this sense, this documen-
tation, complete with the use and maintenance manuals supplied by the manufacturers of the single components, is an integral part of the LDPU.
The purpose of all the documentation mentioned above is to put the users of the LDPU in the conditions to operate safely, thus putting in place clear rules
of use; this documentation must be carefully read and understood by the users.
Please note that the specifi cations carried on all the use and maintenance manuals, with reference to this machine, are designed to ensure safety and
health of the users and therefore they must carefully read, understand and apply the indications/procedures.
The compliance with these indications enables the safe use of the machine, as well as the implementation of appropriate interventions.
As indicated above, the declaration of conformity and all use and maintenance technical manuals concerning the LDPU will accompany it in the event it
is sold to other users.
This documentation must be kept with care until the fi nal demolition of the same LDPU and must be made available to the personnel appointed to ope-
rate.
It is good practice not to damage the manual and keep it properly, do not tear pages, dirty them or get them greasy, never expose them to sources of heat
and always maintain the proper layout. This documentation and relative annexes must also be made available to the personnel authorised to operate on
the LDPU, in such a way that it can be consulted easily , to clear any doubts about its safe operation and/or about the execution of use and maintenance
procedures.
What is contained in the technical manuals refl ects the state of the art at the time of construction of the machine in question. The technical manuals
cannot be considered inadequate, as a result of technological improvements of the LDPU.
The technical documentation and relative annexes are completely confi dential: reserves all rights related to this use and maintenance manual and
with the object presented therein. The receiving party recognises these rights to O.M.A.C. s.r.l., in the person of its legal representative, Mrs Paola
ZAVARONI, and undertakes, in the absence of an explicit written consent, not to make it accessible to others, either in whole or in part and, not to use it
outside the purpose for which it was created. Violators will be prosecuted according to law.

SYMBOLS USED

Important information, regarding the technical reliability and safe use, are highlighted in this manual in the following way (these symbols always precede
the text they refer to):
DANGER
The DANGER symbol draws attention to a procedure, practice or similar measure which, if not performed correctly, can result in injury. Do not proceed
beyond a DANGER symbol until you have fully understood and satisfi ed the conditions specifi ed.
WARNING
The WARNING symbol draws attention to an operating procedure, practice or other similar measure that is potentially dangerous, which may involve risk
of serious injury, if the instructions are not followed scrupulously.
ATTENTION
The ATTENTION symbol draws attention to an operating procedure, practice or other similar measure, which if not correctly performed or observed, can
damage or completely destroy the product. Do not proceed beyond an ATTENTION symbol until you have fully understood and satisfi ed the conditions
specifi ed.
NOTE
Refers to technical aspects for which the user of the equipment must pay particular attention.
X
Via Giovanni Falcone, 8 42048 Rubiera (RE) - Italy
E-mail:info@omacpompe.com SitoWeb:www.omacpompe.com
O.M.A.C. s.r.l.
Tel.0522/629371 - 629923 Fax 0522/628980
Rev.4 del 01/2011 O.M.A.C. s.r.l.