Handmooring; Handmooring Application Protections - ABB ACS880 Firmware Manual

Winch control program (option +n5100)

Hide thumbs Also See for ACS880:

Table of Contents

Winch program features 57

Handmooring

Handmooring is a speed control application mode where the operator controls the

mooring winch manually from one of the control stands.The operator pays out and

hauls in the mooring winch and gives the speed reference with the joystick. The

target of the Handmooring is to connect the vessel to a harbor pier with ropes and

create pretension in the ropes.

When Handmooring is completed and pretension is achieved in the ropes, the

operator can switchover to Automooring mode for controlling the tension of the ropes.

Mooring drum

Mooring rope

Control stands

Settings and diagnostics

74.30 Handmooring max speed

74.32 Handmooring acc

74.33 Handmooring dec time

74.34 Handmooring max torque

For Handmooring application protections, see

Slip detection

(page 75) and

torque protection

Settings and diagnostics

79.01 Peak torque protection enable