Turning Off A Daily Or Weekly Alarm; Quicknotes; Indicators - Motorola LS550 User Manual

Press
m 81 f hjl b e
SET
SET
At the alarm time, your pager alerts,
ALARM 1
flashes. Press any button to remove the
alarm indication.
Note: If the alarm is set for Weekly or Daily,
the

Turning Off a Daily or Weekly Alarm

From the Standby screen, press
m 84 f hjl b e
Press and release
SET ALARM
displayed, then press
Press and release
m 84 f hjl b e
then press
OFF
The
Connect Function
The menu selection is intended for use by service personnel only. When
CONNECT
cC Cc
selected, an alternating pattern of is displayed. To exit this screen, press any
button twice and the pager restarts.
Message and Pager Indicators
Your pager has several indicators to inform you of the status of your messages and
your pager.
Duplicate Message
When a new message is received that is identical to one already stored, the older
message is overwritten by the new one. DUPLICATE
message and new time stamp.
Errored Data
When a message is received that might contain errors, the characters likely to be in
error flash when the message is read.
Alarm
The alarm icon is displayed when the alarm is set and flashes during the alarm
l
alert.
s
.
is displayed momentarily.
is displayed, and the l indicator
l indicator stays on the display.
t
twice.
r
until is
SET ALARM
s
twice.
r
until is displayed,
OFF
s
.
TIME screen is displayed momentarily.
is displayed before the new
Optional Features

QuickNotes

QuickNotes are short messages that can be displayed when you are paged. There
can be up to 5 QuickNotes stored in your pager. The person paging you activates
these messages by entering a code followed by the rest of the message.
To receive a QuickNote, the person paging you enters ** on the keypad, then the
code, then the rest of the message. For example, if someone paged you and entered
**087, you would receive a message like this
Note: QuickNotes are subject to change. Contact your service provider to verify
the list and to make desired changes.
Code Message
Displayed
087 Running Late
115 I am home
66
65
Memory Full
When the pager memory is full, for example, all message locations are occupied,
FULL is displayed on the Standby screen until a button is pressed. When this occurs,
delete your old unwanted messages to make room for newer messages.
also displayed if you try to move a message into the message folder when there is not
enough storage space left.
Note: If you don't delete any old messages, the pager automatically deletes the
oldest read message to make room for the new message.
Low Battery
When the voltage of the pager's battery drops below a certain level,
on all screens, even when the pager is off. The low-battery condition is displayed until
the battery is replaced.
Note: Check your pager's clock time after replacing the battery.
68
67
RUNNING LATE .
Code Message Code Message
Displayed Displayed
103 Meet you at 114 Pick me up
143 I love you
b
MEM
MEM FULL is
is displayed