Deleting Messages; Delete A Single Message; Delete All Messages; Set A One-Time Alarm - Motorola 6881029B40-A User Manual

Motorola pager user's guide
Table of Contents

Advertisement

Deleting Messages

This feature allows you to delete unlocked and un-alarmed messages.
To Delete a Single Message
From the Message-status screen, press H or I to select the message
you want to delete.
K
Press
.
Press I to move the cursor to A.
K
Press
.
DELETE MESSAGE?
is displayed.
K
Press
again to delete the message.
To Delete a Message while Reading It
Follow steps 2 through 5 above while the message is displayed.
To Delete All Unlocked, Un-alarmed and Read Messages
From the Function menu, press I to move the cursor to C.
K
Press
.

DELETE ALL MESSAGES?

K
Press
. All unlocked, un-alarmed and read messages are deleted.
Note: Notebook messages are not deleted with this feature.
The alarm symbol shows the current alarm status. cis displayed if the
alarm is enabled, e is displayed if the alarm is disabled.
Press I to move the cursor to the alarm symbol.
Press F or G until c is displayed.
Press I to move the cursor to the hour digits.
Press F or G to adjust the hour digits.
Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr., and date.
K
Press
to activate your selection. The Q symbol is displayed on the
Standby screen.
Note: To exit from any screen without making changes, press
is displayed.
15
J
.
17
Pager Alarm
Your pager has an alarm that can be set for a specific time and date, or a
specific time on a daily basis.
At the selected alarm time, your pager alerts. If the alarm times passes
without being acknowledged, Q flashes until any button is pressed.
To Set a One-Time Alarm
From the Function menu, press H to move the cursor to v.
K
Press
. The Set-time-and-alarm screen is displayed.
Press G. The Set-alarm screen is displayed.
z
0
v
3:15PM 05/05/97
1
zc
5:30PM 05/05/97z
SET ALARM
Example of Set-Alarm Screen for a Specific Time and Date
16
To Set the Alarm to Alert Daily
Follow steps 1 through 8 in "To Set a One-Time Alarm" to set the alarm
time.
When setting the date in step 8, press G until you see double dashes for
the month, day, and year (--/--/--).
z
v
0
3:15PM 05/05/97
zc
1
5:30PM --/--/--z
SET ALARM
Example of Set-Alarm Screen for a Daily Alert
K
Press
to activate your selection. The alarm is now set to alert every
day at the specified time and Q is displayed on the Standby screen.
Note: To exit from any screen without making changes, press
18
z
z
J
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Advisor elite

Table of Contents