Chapter4. Cash & Check In Module - Nautilus Hyosung MX8800 Manual

Chapter4. Cash & Check In Module
Chapter4. Cash & Check In Module
Code Problem Description
97I0001 A WFSStartUp has already been
issued by the application, without
an intervening WFSCleanUp.
97I0002 The range of versions of XFS API
support requested by the
application is higher than any
supported by this particular XFS
Manager implementation.
97I0003 The range of versions of XFS API
support requested by the
application is lower than any
supported by this particular XFS
Manager implementation.
97I0004 The request was canceled by
WFSCancelAsyncRequest or
WFSCancelBlockingCall.
97I0005 The specified hKey parameter
does not correspond to a currently
open key.
97I0006 The value specified by the
lpszValueName parameter does
not exist in the specified key.
97I0007 The key specified by lpszSubKey
does not exist.
97I0008 The specified value does not exist
within the specified open key.
97I0009 The specified key has subkeys
and cannot be deleted. The
subkeys must be deleted first.
97I0010 The length of the name to be
returned exceeds the length of the
buffer.
97I0011 There are no more subkeys to be
returned (the iSubKey parameter
is greater than the index of the last
subkey).
97I0012 The length of the value to be
returned exceeds the length of the
buffer.
97I0013 The function required device
access, and the device was not
ready or timed out.
97I0015 An internal inconsistency or other
unexpected error occurred in the
XFS subsystem.
97I0016 The lpvOriginal parameter does
not point to a previously allocated
buffer.
97I0017 The specified application handle is
not valid, i.e. was not created by a
preceding create call.
© 2014 Nautilus Hyosung Inc. All Rights Reserved.
Troubleshooting
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
1. Restart the ccim sp
Error Code Manual
4-1