Eis Caution / Warning Lights; Smart Glide - Garmin G3X TOUCH Single 7 Manual

When both switches are in the FLASH position, the landing and taxi lights alternate off and on with
each other to produce the 'Wig-Wag' effect.
Before landing, switch to ON for steady landing lights.

7.12 EIS Caution / Warning Lights

If the G3X EIS display is outside the pilot's primary field of view and a PFD is not installed to provide
EIS annunciations, discreet Caution/Warning lights are installed. The lights are installed in the primary
field of view and are labeled ENGINE. Only a G3X EIS exceedance from a gauge on the Main EIS
Display triggers the EIS Caution/Warning lights. EIS gauges that are not on the Main EIS Display do
not alert.

7.13 Smart Glide

When installed with a Garmin GTN Xi with Smart Glide enabled, the G3X Touch will provide Smart
Glide map indications, annunciation of GLIDE, and Emergency Page data for the Smart Glide feature.
If displayed, the G3X Touch Glide Range Ring will be removed when Smart Glide is active. Refer to
GTN Xi glide range ring display. For more details on the Smart Glide function, refer to the GTN Xi
Pilot's Guide (190-02327-03, revision D or later) and GTN Xi AFMS (P/N 190-01007-C2 or 190-01007-
C3, revision 4 or later).
190-01754-01 Rev. 5 AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
P a g e | 7-9