Barometric Minimums Alert; Transponder Operation (Optional); Disable Electronic Stability Protection (Esp) - Garmin G3X TOUCH Single 7 Manual

OR
Fly ATC Assigned Missed Approach Heading
The pilot is responsible for initial missed approach guidance in accordance with
published procedure. The G3X Touch may not provide correct guidance until the
airplane is established on a defined leg of the procedure.
8. Set Missed Approach Altitude ........................................ Touch the Reference Altitude display.
4.6

Barometric Minimums Alert

A barometric minimums alert is provided in the G3X Touch to enhance the pilot's awareness of
approaching altitude minimums while flying an instrument approach procedure.
Setting the barometric minimums alert bug:
1. On the PFD, Touch the HSI.
2. Touch the Highlight Minimums window.
3. Enter Barometric Altitude Minimums and touch ENTER
If a new approach is loaded into an external IFR capable navigator, the pilot will need
to update the Barometric Minimums Alert in the G3X Touch with the new approach's
altitude minimums.
4.7

Transponder Operation (Optional)

Entering Transponder Code
1. Touch the transponder data box.
2. Use the keypad to enter a code and touch ENTER.
IDENT
1. Touch IDENT, the green bar illuminates momentarily.
4.8

Disable Electronic Stability Protection (ESP)

(If Installed, GFC 500 Autopilot)
To disable ESP for flight training purposes or aerobatic maneuvers:
1. Touch the AFCS Status Box at the top of the PFD. Automatic Flight Control System window
opens.
2. Highlight and Select ESP. The green ESP status bar extinguishes. ESP is disabled.
190-01754-01 Rev. 5
FAA Approved
NOTE
Enter the Missed Approach Altitude.
CAUTION
AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
P a g e | 4-15