Quick Start With Home Connect; Home Connect Settings; Remote Start - Siemens SN43HS36TE Instructions Manual

NLHome Connect
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
Tips
†Take the supplied document
of Home Connect. †Also take
the directions
the Home Connect app.
NoteObserve the safety instructions in
these operating instructions and
ensure that they are also observed
when you operate the appliance via
the Home Connect app.
→ †Safety", Page 4
Quick start with Home
Connect
Connect the device quickly and easily
to a mobile end device.
Install app
Install the Home Connect app on
1.
your mobile terminal device.
Start the app and configure access
2.
for Home Connect.
The Home Connect app guides you
through the entire registration process.
38
Connect device to WLAN home
network (Wi-Fi)
Conditions
†The Home Connect app is on the
mobile terminal installed.
†Wifi on the router is activated. †The
basic Wi-Fi setting is on the
device activated.
†The appliance has
cation reception of the WLAN
home network (Wi-Fi).
Scan the QR code using the Home
1.
Connect app.
Follow the instructions of the
2.
Home Connect app.

Home Connect settings

Adapt Home Connect to your needs.
You will find the Home Connect settings
in the basic settings of your appliance.
Which settings the display shows
depends on whether Home Connect is
installed and whether the appliance is
connected to the home network.

Remote Start

You can start the appliance with your
mobile terminal device via the Home
Connect app.
Tip:If you are in the "Basic Settings"
→ Page 37 of this function is set to
"rc2", the function is permanently