Troubleshooting; Error Code / Error Indication / Signal - Siemens SN43HS36TE Instructions Manual

Table of Contents

Advertisement

NL

Troubleshooting

s fix disruptions
k You can remedy minor faults on the device yourself. Before using
contact customer service for information on troubleshooting. This way you
avoid unnecessary costs.
WARNING
Danger of electric shock! Improper
repairs are dangerous.
Only qualified personnel may carry out repairs on the device.
Only original spare parts may be used for repair of the device.
If the power cord of this appliance is damaged, it must be replaced with a
special cord available from the manufacturer or its service agent.

Error code / error indication / signal

Malfunction
E:21-60 lights up alternately.
E:30-00 lights up alternately.
E:31-00 lights up alternately.
E:34-00 lights up alternately.
E:32-00 lights up alternately
or water supply indicator
lights up.
44
Cause
The appliance has
detected a calcified
heating element.
Aquastop system is
activated.
Aquastop system is
activated.
Water flows continuously
into the device.
Water supply hose is
kinked.
Tap is closed.
Tap is clogged or calcified.
The strainers in the water
connection of the supply or
AquaStop hose are
clogged.
To fix an issue
Descale the appliance.
1.
Use the appliance with the water
2.
softener.
1.
Close the tap.
Contact the "service
2.
department"→Page 59.
1.
Close the tap.
Contact the "service
2.
department"→Page 59.
Close the tap.
1.
Contact the "service
2.
department"→Page 59.
Route the water inlet hose
without kinks.
Turn on the tap.
Turn on the tap.
The amount of water flowing
in when the tap is open is at
least 10 l/min.
Turn off the device.
1.
Remove the plug from the socket.
2.
Turn off the tap.
3.
Unscrew the water connection.
4.

Advertisement

Table of Contents
loading

Table of Contents