Siemens SN43HS36TE Instructions Manual page 45

Malfunction
E:32-00 lights up alternately
or water supply indicator
lights up.
E:92-40 lights up alternately.
E:61-03 lights up alternately.
The water is not pumped
out.
E:61-02 lights up alternately.
E:90-01 lights up alternately.
Cause
Strainers are dirty or clogged.
Drain hose is clogged or
kinked.
Siphon connection is still closed.
Drain pump cover is
loose.
Drain pump is blocked.
Drain pump cover is
loose
Mains voltage is too low.
TroubleshootingNL
To fix an issue
Remove the strainer from the inlet hose
5.
Clean the strainer.
6.
Place the strainer in the supply hose.
7.
Screw on the water connection.
8.
Check the water connection for
9.
leaks.
Put the plug back in the
10.
socket.
Turn on the device.
11.
▶
Clean the sieves.
"Cleaning sieves", Page 42
Route the drain hose without
1.
kinks.
Remove the remains.
2.
▶
Check the connection to the
siphon and open it if necessary.
▶ Make the cover of the "drain
pump"→Page 57well fixed.
▶
Clean the drain pump.
"Cleaning the drain
pump", page 57
▶ Make the cover of the "drain
pump"→Page 57well fixed.
There is no error in the device.
Contact an electrician.
1.
Have the mains voltage and electrical
2.
installation checked by the
electrician.
45