Table of Contents
Advertisement
Basic setting
Remote Start
Factory setting
1
Factory setting (may differ depending on the device type)
Change basic settings
Press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
aThe display shows Hxx. aThe
display shows
to give.
Just as often on
3.
until the display shows the desired
setting.
Just as often on
4.
the display shows the desired
value.
You can change multiple settings.
To save the settings, press . for
5.
about 3 seconds
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
Display text
Choise
rc1
rc0 - rc2
1
re
Start with
YES
Confirm
of
Busy-
reflected
to press
press until
to press.
Description
"Remote Start", page 38
activate or deactivate.
The following settings are possible: †
With the setting "rc0", the function
permanently deactivated. †With
the setting "rc1", the func-
tie can be selected via the button
†
"Activating Remote Start",
page 39
¡ With the setting "rc2", the function
permanently activated.
Reset changed settings to
factory condition.
Initial commissioning
settings must be specified.
uncle Connect
huh
d
this device is network capable.
Connect your appliance to a mobile
terminal device to be able to operate
functions via the Home Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com. In
order to use Home Connect, you must
first establish a connection to the
WLAN home network (Wi-Fi
be configured with the Home Connect
app.
†→ †Device with WLAN home network
connect work (wifi)", page 38
Home Connect
) and can
1
37
NL
Advertisement
Table of Contents
