Change Basic Settings - Siemens SR53HS28KE User Manual

NLBasic settings
Basic setting
WiFi
Remote Start
Factory setting
1
Factory setting (may differ depending on the device type)

Change basic settings

Press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
aThe display shows Hxx. aThe
display shows
to give.
Just as often on
3.
until the display shows the desired
setting.
36
Display text
Choise
Cn0
Cn0 - Cn1
rc1
rc0 - rc2
re
Start with
YES
Confirm
of
Busy-
reflected
to press
Description
Enable or disable wireless
network connection.
The "Cn0" position disables the
wireless network connection. The
basic setting "Wif-Fi" is only available
after you have connected the
appliance with the Home Connect
app.
"Home Connect", page 37
"Remote Start", page 38
activate or deactivate.
The following settings are possible: †
With the setting "rc0", the function
permanently deactivated. †With
the setting "rc1", the func-
tie can be selected via the button
†
"Activating Remote Start",
page 38
†With the setting "rc2", the function
permanently activated.
This basic setting is only available after
you have connected the appliance with
the Home Connect app.
"Home Connect", page 37
Reset changed settings to
factory condition.
Initial commissioning
settings must be specified.
Just as often on
4.
the display shows the desired
value.
You can change multiple settings.
To save the settings, press . for
5.
about 3 seconds
press until
to press.