Change Basic Settings; Home Connect - Siemens SN45ES57CE User Manual

NLHome Connect
Basic setting
Factory setting
1
Factory setting (may differ depending on the device type)

Change basic settings

Press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
aThe display shows H:xx
to give.
aThe display shows
to give.
Just as often on
3.
until the display shows the desired
setting.
Press or repeatedly until the display
4.
shows the desired value.
You can change multiple settings.
To save the settings, press . for
5.
about 3 seconds
uncle Connect
huh
d this device is suitable for network
know. Connect your appliance to a
mobile terminal device to be able to
operate functions via the Home
Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
42
Display text
Choise
re:
Start with
Y:ES
Confirm with
Busy-
reflected
to press
to press.
Description
Reset changed settings to
factory condition.
Initial commissioning
settings must be specified.
In order to use Home Connect, you must
first establish a connection to the WLAN
home network (Wi-Fi
configured with the Home Connect app.
†→ †Device with WLAN home network
connect work (Wi-Fi), page 43 The
Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
Tips
†Take the supplied document
of Home Connect. †Also take
the directions
the Home Connect app.
Remark:Observe the safety
instructions in these operating
instructions and ensure that they are
also observed when you operate the
appliance via the Home Connect app.
→ †Safety", Page 4
) and can be
1