Advertisement
1. Intended Use of CCT Six-P
The CCT Six-P is intended for use by fully qualified, trained and competent carers,
attendants, paramedics or other such medical staff as an aid to provide safe and
secure transportation of patients.
The CCT Six-P is a fixed height trolley and its intended use is for the transportation of
critically ill patients. The CCT Six-P also provides the facility and storage for ancillary
equipment on a fixed base tray and drawers.
WARNING – Although the CCT Six-P is designed to fit into a vehicle that has a
Ferno CEN two-part locking device provided for securing the Ferno Falcon Six
Trolley it should be noted that the CCT Six-P's fixed height is higher than that
of the Falcon transport height. Furthermore, the stability of the trolley within
the locking device could be affected by the addition of care equipment; this
equipment should be equally spaced about the trolley, whenever possible.
Combining
different
trolley/fastener system can increase the user's risk of injury and damage if not
checked first for compatibility.
However, Ferno trolleys are designed to be compatible with either the Ferno range of
Two-part locking devices or competitors equivalent locking devices, giving you full
compatibility and interchangeability across your fleet.
Contact Details
Ferno (UK) Ltd.
Ferno House, Stubs Beck Lane,
Cleckheaton, West Yorkshire, BD19 4TZ
United Kingdom
+44 (0) 1274 851999
FERNO/MAN/1121/162-R10/UK
manufacturers'
products
into
a
"mixed-component"
Ferno S.R.L.
Via B. Zallone n.26,
40066 Pieve di Cento, Bologna
Italy
+39 051 6860028
Page 1
Advertisement
