Table of Contents
Advertisement
• Interference from other equipment that generates
ultrasonic waves.
• Extremely hot or cold temperatures.
CAUTION: If a windshield replacement is needed,
take your vehicle to Tesla Service. This ensures
appropriate handling and mounting of the
camera(s). Failure to do so can cause one or more
Autopilot features to malfunction.
WARNING: The list above does not represent an
exhaustive list of situations that may interfere with
proper operation of Autopilot components. Never
depend on these components to keep you safe. It
is the driver's responsibility to stay alert, drive
safely, and be in control of the vehicle at all times.
WARNING: Advanced safety features may not be
available during the calibration period.
WARNING: Re-calibrating the cameras or sensors
on the touchscreen is not a substitute for checking
the physical positioning and condition of these
components. Walk around your vehicle and inspect
the cameras and sensors for physical damage.
Incorrectly calibrated or positioned cameras and
sensors may limit or disable the use of safety
features. Contact Tesla if you suspect lingering
issues.
Cleaning Cameras and Sensors
To ensure the various Autopilot components can provide
information that is as accurate as possible, keep them
clean and free of obstructions, condensation, or damage
(see
Cleaning on page
190).
Condensation can form inside the camera enclosures,
especially if you park your vehicle outside in cold or wet
conditions. The instrument cluster may display an alert
stating that a camera is blocked and that some or all
Autopilot features may be temporarily restricted until
the camera vision is clear. To proactively dry the
condensation, precondition the cabin by setting it to a
warm temperature, turning the windshield defroster on,
and directing the front air vents toward the door pillars
(see
Mobile App on page
CAUTION: Do not wipe an exposed lens with your
hands or a cloth in an attempt to remove dirt or
debris. The debris can damage the surface of the
lens when wiped.
CAUTION: Do not use chemical-based or abrasive
cleaners. Doing so can damage surfaces.
CAUTION: Do not clean an ultrasonic sensor or
camera lens with a sharp or abrasive object that
can scratch or damage its surface.
Autopilot
171).
About Autopilot
95
Advertisement
Table of Contents
