Download Print this page

Preparing The Lawn Mower For Operation; Assembling The Lawn Mower - Stihl RMA 765.0 V Instruction Manual

Hide thumbs Also See for RMA 765.0 V:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22

5 Preparing the Lawn Mower for Operation

5
Preparing the Lawn Mower
for Operation
5.1
Preparing the Lawn Mower for
Operation
The following steps must be performed before
commencing work:
► Remove packaging material and transport
locks.
► Make sure that the following components are
in safe condition:
– Lawn mower,
– Blades,
4.6.2.
– Battery, as described in the instruction man‐
ual for the STIHL AR L battery or the
instruction manual for the ADA 700 double-
battery compartment and the safety instruc‐
tions for the STIHL AP battery.
► Check the battery as described in the instruc‐
tion manual for the STIHL AR L battery or the
instruction manual for the ADA 700 double-
battery compartment and the safety instruc‐
tions for the STIHL AP battery.
► Charge the battery fully as described in the
instruction manual for the STIHL AL 101, 301,
301-4, 500 charger.
► Clean the lawn mower,
► Check the blades,
► Fold up and adjust the handlebar,
► If mowing and the mown grass is to be collec‐
ted in the grass catcher box: attach the grass
catcher box,
6.1.2.
► If mowing and the mown grass is to be ejected
to the rear: detach the grass catcher box,
6.1.3.
► Set the cutting height,
► Check the controls,
► If the steps cannot be performed: do not use
the lawn mower and consult a STIHL special‐
ist dealer.
0478-131-9938-G
4.6.1.
16.2.
11.2.
7.1.
12.2.
11.1.
6
Assembling the Lawn
Mower
6.1
Assembling, Attaching and
Detaching the Grass Catcher
Box
6.1.1
Assembling the Grass Catcher Box
► Pull fabric (1) over frame (2) so that the base
plate is on the bottom and handle (3) is on the
outside of the fabric.
► Press plastic profiles (4) onto the frame.
The plastic profiles engage with a click.
6.1.2
Attaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (2) by han‐
dle (3) and attach hook (4) to axle (5).
► Set down discharge flap (1) on grass catcher
box (2).
6.1.3
Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
English
29

Advertisement

loading