Table of Contents
Advertisement
8
Move to the TO location, and playback to check
that the copy was performed correctly. If the data
was copied to the wrong location, press the
[UNDO] key to return the data to the previous con-
dition, and then perform the copy operation once
again.
Example: Copying the IN–OUT area of track 1 to the TO location of track 2
three times in the same song
Source track
1
2
(copy source)
Destination track
A
B
(copy destination)
TO
Copying the IN–OUT area of track 1 to the TO
location of another song track once
As an example, we will explain how to copy the
IN–OUT area of track 1 to the TO location of track
1 of song 2 once.
1
As described in "1. Storing IN, OUT and TO loca-
tions", store the IN and OUT locations in the song
1 track.
2
Press the [EDIT] key, and then press the [SONG/
TRACK] key several times to access the "Edit-
Track" display.
3
Press the [
] key, and then press the [SONG/
TRACK] key several times to access the "Cpy" dis-
play.
4
Rotate the [VALUE] dial to set the source track (the
track from which the data will be copied) to 1.
5
Press the [
] key, and then rotate the [VALUE]
dial to set the destination track (the track to which
the data will be copied) to TrCLP (clipboard).
øTrCLP
œ
6
Press the [
] key, and the display will indicate
"?". Make sure that the setting is correct. If you are
sure that you wish to copy the data to the clip-
board, press and hold the [
mately one second. When the data has been
copied, the display will indicate "Completed".
7
Hold down the [STOP] key and press the [FF] key
to recall song 2.
8
As described in "1. Storing IN, OUT and TO loca-
tions", store the TO location.
9
Press the [EDIT] key, and then press the [SONG/
TRACK] key several times to access the "Edit-
Track" display.
10 Press the [
] key, and then press the [SONG/
TRACK] key several times to access the "Cpy" dis-
play.
32
3
4
5
6
IN
OUT
3
3
3
] key for approxi-
11 Rotate the [VALUE] dial to set the source track (the
track from which data will be copied) to TrCLP1.
CpyTrCLPϿ
12 Press the [
] key, and then rotate the [VALUE]
dial to set the destination track (the track to which
the data will be copied) to 1.
øTr
1x 1œ
13 Press the [
] key, and then rotate the [VALUE]
dial to set the number of copies to 1.
14 Make sure that you have made the correct settings.
If you are sure that you wish to execute the copy
operation, press and hold the [
mately one second. When the copy is completed,
the display will indicate "Completed". Press the
[
] key to restore the previous display.
15 Move to the TO location, and playback to check
that the copy was performed correctly. If the data
was copied to the wrong location, press the
[UNDO] key to return the data to the previous con-
dition, and then perform the copy operation once
again.
Example: Copying the IN–OUT area of song 1 track 1 to the TO location
of song 2 track 1 once
Song 1
Source track
1
2
(copy source)
Song 2
Destination track
A
B
(copy destination)
] key for approxi-
3
4
5
6
IN
OUT
C
D
4
TO
Hide quick links:
Advertisement
Chapters
Table of Contents
