Presenting Slide Films - JVC AV-P960E Instructions Manual

Presenting Slide Films

Slide films with frame can be inserted directly into the camera head for presentation.
2.
Stage
E-14
2.
1.
[BRIGHT] button
[ZOOM]
button
3.
5.
[BRIGHT] button
4.
[ZOOM]
button
6.
[FOCUS]
button
1.
Place a piece of white paper on the
stage
As the slide film makes use of the reflecting light from the stage
surface, place a highly reflective white paper (B4 size or A3 size)
on the stage.
2.
Adjusting side illuminations
Adjust such that the stage surface is evenly lighted.
3.
Insert the slide film
Note
Use only slide films with mounting frame.
4.
Adjusting zoom
ZOOM
OUT IN
5.
Adjusting brightness
BRIGHT
AUTO
Notes
● Automatic brightness adjustment will be disabled whenever
Nega is selected. The indicator lamp blinks rapidly to indicate
that operation is not possible.
● Under negative mode, pressing the [BRIGHT
the images while pressing the [BRIGHT
the images.
● Under negative mode, pressing the [WHITE BALANCE] but-
tons [RED ] or [BLUE
nent while pressing the [RED
the red or blue component.
6.
Adjust focus
Use the [FOCUS
Note
If the slide film is inserted vertically, zooming in (enlarging) un-
til the mounting frame cannot be seen may cause the focus to
be out. In this case, set zoom to [OUT].
Adjust such that the portion of the object to
be captured occupies the full screen.
Adjust the brightness while looking at the
image displayed on the monitor.
] button brightens
] decreases the red or blue compo-
] or [BLUE ] button increases
, ] buttons to adjust the focus.
] button dims