Viewing Image Data Stored In Sd Card - JVC AV-P960E Instructions Manual

Digital presenter
Hide thumbs Also See for AV-P960E:
Table of Contents

Advertisement

Available languages

Available languages

Viewing Image Data Stored in SD Card

Images stored in the SD card can be viewed.
DELETE
SAVE
IMAGE SELECT
PAGE
ENTER
SD CARD
SD CARD SYSTEM
3.
3.
2.,3.
<Thumbnail display screen>
● The cursor will move as shown below when the
[PAGE
] button is pressed.
Next page
Cursor
● Pressing and holding either the [ ] or [ ] but-
ton moves the cursor continuously (at an inter-
val of 0.1 second). If the last image of the cur-
rent page is reached, the next page will be dis-
played.
● The image selected by the cursor can be de-
leted. (☞ Page 20 'Deleting images')
Notes
● When removing or inserting the SD card or when powering off, make sure to press the [CAMERA] button and confirm that the output image is a
camera image. Otherwise, the data in the card may be corrupted or this unit may not function properly.
● The SD card is made from parts that are susceptible to static charges. Malfunction might occur and the contents of the card might be damaged
due to static charges. As such, make sure to handle with extra care.
● Only images that are of the same type as the data stored via this unit can be viewed.
● JPEG data taken with digital camera and JPEG data downloaded via Web may be converted to image data viewable on this unit by using [JPEG
conversion software (Exif Conv.exe)] in the CD-ROM provided with this unit. For details, read JPEG conversion software's Instruction [Exif
Cnv.pdf] in the CD-ROM.
(The software [JPEG conversion software (Exif Conv.exe)] can also be downloaded from http://www.jvc-victor.co.jp/english/pro/prodv/down-
load/index.html.)
● If SD card image is selected without inserting the card, the output image will turn black.
● The zoom, brightness and focus operations are not applicable for images stored in the SD card.
1.
2.
1.
5.
3.
FREEZE
LIGHT
EXT IN
CAMERA
SOURCE
SELECT
4.
4.
5.
Insert the SD card
Press the [SD CARD SYSTEM] buttons
Viewing images
<Viewing images one at a time>
Press the [PAGE] buttons
● The image switches whenever the button is pressed.
● The image will switch continuously if the button is pressed and
held. (at an interval of about 0.5 seconds)
Note
● The first image of the SD card will be displayed if the [IMAGE SE-
LECT/ENTER] button is pressed for more than 2 seconds.
<Viewing images at one time (thumbnail)>
Press the [IMAGE SELECT/ENTER] button
● 16 images are displayed in a view.
● Use the [PAGE
,
● Pressing [ ] at the last image of the page displays the next
page while pressing [ ] at the first image of the page displays
the previous page.
● If the [IMAGE SELECT/ENTER] button is pressed when the
image has been selected by the cursor, the selected image
will be displayed on the screen in full size.
<Viewing images one at a time automatically (slide show)>
While holding down the [SD CARD SYSTEM] buttons, press
the [IMAGE SELECT/ENTER] buttons within 1 second.
● From the image currently displayed, the following images will
be displayed in sequence automatically. (at an interval of about
2 seconds)
● When the [IMAGE SELECT/ENTER] or [PAGE] buttons are
pressed once again, the image being played back will be se-
lected and the operation stops.
Press the [CAMERA] button
● Confirm that the output image is a camera image.
Removing the SD card
● To remove the SD card, push in the card before removing it from
the card slot.
] buttons to move the cursor.
E-21

Advertisement

Table of Contents
loading

Table of Contents