Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
D.
Bottom
1 pc.
E.
Shelf
3 pcs.
Hardware List
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cartons 20 05436 0921 and 0922 are also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/16" Drill Bit, 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05436 0923
Storage Island
M6x32
Cam Lock Screw
Head Cap Bolt
24 pcs. (+2 extra)
12 pcs. (+1 extra)
M3.5x32
Cam Lock
Wood Screw
4 pcs. (+1 extra)
24 pcs. (+6 extra)
H.
Plinth
2 pcs.
G.
Rail
2 pcs.
Flat Washer
12 pcs. (+1 extra)
Adjustable Pin
12 pcs. (+1 extra)
888-680-7460, 877-831-0319
I.
Drawer
1 pc.
J.
Drawer
2 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
Spring Washer
12 pcs. (+1 extra)
M4x25
Machine Screw
6 pcs.
Knob
6 pcs.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Homestyles 20 05436 0923
Summary of Contents for Homestyles 20 05436 0923
- Page 1 24 pcs. (+6 extra) Cartons 20 05436 0921 and 0922 are also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/16” Drill Bit, 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/8 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the screws until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/8 STEP 2 Attach Back Panel (F) to Bottom (D) with Cam Locks. (See Figure 2) Note: Arrow label indicates front of Bottom (D). Figure 2 Arrow label at front Cam Lock STEP 3 Attach Plinths (H) to unit with Cam Locks. Cam Lock...
- Page 4 Assembly Instructions 4/8 STEP 4 Wood Screw Attach unit to Side Panel (C) with Cam Locks, Flat Washers, Spring Washers and Head Cap Bolts, tightening bolts only halfway. (See Figure 3) Attach Rails (G) to unit with Wood Screws, into pre-drilled holes. (See Figure 4) Head Cap Bolt Spring Washer Flat Washer...
- Page 5 Assembly Instructions 5/8 Drawer (I) STEP 6 Attach Drawer Sides (I3) and (I4) to Drawer Back (I2), then flip Locks. (See Figures 5 and 6) Lock STEP 7 Figure 5 Figure 6 Slide Drawer Bottom (I5) into grooves in unit. Attach Drawer Front (I1) to unit, then flip Locks.
- Page 6 Assembly Instructions 6/8 Drawer (J) STEP 9 Attach Drawer Sides (J3) and (J4) to Drawer Back (J2), then flip Locks. Lock STEP 10 Slide Drawer Bottom (J5) into grooves in unit. Attach Drawer Front (J1) to unit, then flip Locks. Machine Screw Knob Lock...
- Page 7 Assembly Instructions 7/8 STEP 12 Level unit by adjusting the adjustable levelers on bottom of unit from Step 5 (See Figure 7) Insert Adjustable Pins into side panels at desired level. (See Figure 8) Place Shelves (E) into position. Adjustable Pin Figure 7 Figure 8 Cam Lock...
- Page 8 Assembly Instructions 8/8 Per regulatory requirements, a Tip-over Restraint is included. Follow Step 15 to install it. STEP 15 Drill a 3/16” hole 1/2” deep 1” below top of unit in middle of side panel that is Anchor in wall Wall Screw Bracket 3/16”...
- Page 9 Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customer-service/replacement-parts Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Need help?
Do you have a question about the 20 05436 0923 and is the answer not in the manual?
Questions and answers