Installing The Lights - Toro 04135 Installation Instructions Manual

2

Installing the Lights

Parts needed for this procedure:
2 LED light
2 Light mount
2 Mount cap
2 Bolt (3/8 inch)
2
Bolt (5/16 inch)
2 Nut (3/8 inch)
2 Nut (5/16 inch)
Procedure
1. Use 2 bolts (3/8 inch), 2 bolts (5/16 inch), 2 nuts
(3/8 inch), and 2 nuts (5/16 inch) to secure the
light mounts to the machine frame
2. Install the mount caps onto the mounts
1).
3. Use the washers and nuts provided with each
LED light to secure the lights to the mounts
(Figure 1).
(Figure 1).
(Figure
1. Mount cap
2. Light mount
3. Nut (3/8 inch)
4. Nut (5/16 inch)
5. Bolt (3/8 inch)
2
Figure 1
6. Bolt (5/16 inch)
7. LED light
8. Washer—LED light
assembly
9. Nut—LED light assembly
g282107