Advertisement
4
Installing the Switch
Parts needed for this procedure:
1
Switch
Procedure
1.
Remove the plug from the handle
2.
Connect the switch with the 8-socket connector
of the wire harness
1. Plug
2. Switch
(Figure
(Figure
3).
Figure 3
3. 8-socket connector
Operation
Operating the Lights
•
Turn on the lights: Press the top of the switch
(Figure
4).
•
Turn off the lights: Press the bottom of the switch
(Figure
4).
3).
1. Turn on the lights.
g282108
4
Figure 4
2. Turn off the lights.
g282109
Advertisement
