Advertisement
Step 3C: Install both of the Headboard Bracket assemblies
Place the Headboard Bracket assemblies on the head-side of the adjustable bed frame, according to the diagram below.
Each bracket has two slots for mounting to the adjustable bed frame that will match with two holes on the adjustable bed
frame. Use the holes closer to the center to mount the Headboard Bracket assemblies. The other hole on the adjustable
bed frame is for the Adjustable Legs. Attach each component based on the hardware shown below.
NOTE: Do not tighten. Adjustability is required for a later step.
Tools
6mm Hex Key
Step 4: Adjustable Bed Base Options
Based on your surface, clearance, and bed height
preference; proceed with the next instruction manual
step listed on the table below.
Repeat Assembly (2 times)
+
M10x25 Button
Head Socket
Screws
M10 Washer
P a g e | 9
Advertisement
